EconoMelt 10-21
EconoMeltâ„¢ 2 Hose and Gun System2
EconoMeltâ„¢ 10-4 Temperature Controls3
EconoMeltâ„¢ 10 has a 10 lb. capacity Teflon lined tank.4
EconoChampâ„¢ Handgun5
2 8'-12' Hoses6
EconoChampâ„¢ .060 Nozzle7
DynaChampâ„¢ Extrusion Gun8
EconoMeltâ„¢ 10-2 Hot Melt Tank9
Hot Melt System Configuration11
High volume constant pressure piston pump with air motor and pressure relief valve.
12
Three thermostat controlled temperature zones.13
Multi Module Guns14
Bead Nozzles + Slot Dies15
Top Adjustable16
Case sealing diagram using EconoMelt with an automatic gun with quad fixed orifice17
Bottom Adjustable18
Case Erecting19Compatible With:
All standard hot melt adhesives. (Quality Bulk Adhesives available from Glue Machinery Corporationâ„¢)Product Manuals / Related PDFs:
EconoMeltâ„¢ 10-2/4 Hot Melt Tank
Simple, low cost industrial hot melt tank with 10 lb capacity, high flow piston pump, ability to operate with up to two hoses and guns and four hoses and guns.
$
Product Videos (Click to View)
Product Details:
- 10 lb tank capacity.
- 10 to 15 lb / hour melting rate depending on system voltage and adheisve.
- Air powered piston pump.
- Max viscosity: 12,000 CPS
- Max Operation Temp: 220ºC/428ºF
- Dimensions: 16.93" x 13.39" x 28.74"
- 15 lbs per hour in 240 VAC
- Operates with up to two hoses and guns and four hoses and guns
- Standard hose lengths are 8' and 12'
- Economelt 10/2/4 Tank Power Requirements: 240VAC=11.25 amp/1ph/50-60Hz.
- EconoMelt Hose for EconoMelt 10/2/4 Power Requirements: 120/240VAC= 50w per foot.
- Maximum pump air consumption at 60PSI 1.4 SCFM (30 pump cycles per minute). /li>
QUOTE THIS MACHINERY
EconoMeltâ„¢ 10-2/4 Hot Melt Tank
Call 1-410-761-2727Or Fill Out The Form Below